Midway Plating & Polishing

(519) 963-0393

Call us to discuss your project or to get answers to your questions.

Hours of operation:
8am-5pm E.S.T. Mon-Thurs
8am-4pm E.S.T. Fridays
8am-Noon E.S.T. Saturdays
 
 
The Plating Process

Plating is the process of putting a thin layer of metal (copper, semi-bright nickel, bright-nickel and chrome) over an existing metal surface. This is done with chemicals and electricity.

The thickness of the plating will be greater in "high current" areas such as points, edges, and raised areas where the current will concentrate.

The plating will be thinner in "low current" areas such as recesses, right angles, around holes, and the back side of parts.

The part being plated will be cleaned of all buffing compounds, oils, etc. in a hot Electro cleaner. It will then be rinsed in water and receive an acid dip and more rinsing prior to proceeding to the copper, nickel and chrome tanks. There will be several more water rinses between each plating process.


Polishing of Metal

Polishing is the term used to describe the process of removing metal from a surface. This is done with abrasive discs, belts, wheels and buffs.

In the polishing process, the goal is to remove as many surface imperfections such as pits and scratches, as possible. The reason for this is because the plating is just a reflection of the polished surface.


Photographs
Click Here to view pictures of the plating process.

Home | Contact Us | Location |
midwayplating.ca 2004. All Rights Reserved | Web Design & Hosting by smartwebpros.com Inc.